|
|
| 1. |
Acryl Nitrile
Butadiene Rubber (NBR) |
| 2. |
Ethylene Propylene Dion Rubber
(EPDM) |
| 3. |
Butyl Rubber (IIR) |
| 4. |
Chloroprene (Neoprene) Rubber
(Cr) |
| 5. |
Fluorocarbon Rubber (FPM)
(VITON) |
| 6. |
Fluorosilicone Rubber
(MFQ) |
| 7. |
Polyurethene Rubber
(AU.EU) |
| 8. |
Silicone Rubber
(Q.MQ.MVQ) |
|
|
|
 |
ACRYL
Nitrile Butadiene Rubber (NBR): |
|
|
NBR has good mechanical Properties in comparison with other Elastomers and a particularly ghi Wear
Resistance.
|
|
|
COMPATIBLE WITH: |
|
|
 |
Aliphatic Hydrocarbons
(Propane,Butane, petroleum Oil, Mineral Oil and grease, |
|
Diesel, Fuel, Fuel Oils) * Vegetable and Mineral Oils & Grease |
|
HFA, HFB and HFC - Fluids |
|
Many diluted Acids,
Alkalies, Salt Solutions at low temperatures |
|
Water (Special Compounds upto +
100oC). |
|
|
|
NOT
COMPATIBLEWITH: |
|
|
|
Fuels with high Aromatic contents (for Super Fuels a Special Compound must be
used) |
|
Aromatic Hydrocarbons
(Benzol) |
|
Chlorinate (Trichloroethylene) |
|
Polar Solvents
(Ketone, Acetone, Acetic Acid, Ethyelene, Ester) |
|
Strong Acids |
|
Brake Fluids on Glyson base |
|
Ozone, Ageing
& Weather Resistant. |
|
|
|
|
Ethylene propylene dion rubber
(Epdm): |
|
|
EPDM is a Rubber manufactured as a Co-polymer of Ethylene and
Propylene |
|
|
COMPATIBLE WITH: |
|
|
|
Hot Water and Stream upto +
150oC, Special Comouns upto + 200oC |
|
Brake Fluids on Glycol base upto +
150oC |
|
Many Organic and Unorganic Acids |
|
Cleaning Agents, Natron and
Kali-Alkalies |
|
Hydraulic Fluids based on Phosphate-Ester
(HFD-R) |
|
Silicone Oil and Grease |
|
Many Polar Solvents (Alcohol,
Ketone, Ester) |
|
Skydrol 500 and 7000 |
|
Ozone, Ageing & Weather
Resistant. |
|
|
|
NOT COMPATIBLE WITH: |
|
|
|
Mineral Oil Products (Oil, Grease and Fuel). |
|
|
|
|
Butyl Rubber
(IIR): |
|
|
Butyl has a low Gas permeability rate and good Electrical
Properties. |
|
|
COMPATIBLE WITH: |
|
|
|
Hot Water and Stream Upto +
130oC |
|
Brake Fluids on glycol base |
|
Many Acids |
|
Salt Solutions |
|
Polar Solvents e.g. Alcohol, Ketone and Ester |
|
Hydraulic Fluides based on Poly-Glycol
(HFC-Fluids) and Phosphate-Ester |
|
(HFD-R-Fluids) |
|
Silicone Oil and Grease |
|
Skydrol 500 and 7000 |
|
Ozone, Ageing and Weather
Resistant. |
|
|
|
NOT COMPATIBLE WITH: |
|
|
|
Mineral Oil and Grease |
|
Fuels |
|
Cholorinated Hydrocarbons. |
|
|
|
|
Chloroprene (Neoprene) Rubber (CR): |
|
|
|
|
|
|
Fluorocarbon Rubber (FPM)
(VITON): |
|
|
FPM has an excellent Resistance to High Temperatures, Ozone, Oxygen, Mineral Oil, Synthetic Hydraulic Fluids, Fuels, Aromatics & many Organic Solvents and
Chemicals.
|
|
|
COMPATIBLE WITH: |
|
|
|
Mineral Oil and Grease, Low Swelling in ASTM Oil No. 1-3 |
|
Non-flammable Hydraulic Fuels in theground HFD |
|
Silicone Oil and Grease |
|
Mineral Oil, Vegetable Oil and Grease & Alphatic Hydrocarbons |
|
( Butane, Propane Fuel, Natural Gas) |
|
Aromatic Hydrocarbons (Benzene, Toluene) |
|
Chlorinated Hydrocarbons
(Trichloroethylenr and Carbon Tetrachloride) |
|
Fuels |
|
Fuels with Metganol content |
|
High Vacuum |
|
Very good Ozone, Ageing and Weather Resistance. |
|
|
|
NOT COMPATIBLE WITH: |
|
|
|
Polar Solvents
(Acetane, Methyl Ether, Ketone, Ethyl Acetate,
DiethylEther, Dioxane) |
|
Skydro500 and 7000 |
|
Brake Fluide on Glycol base |
|
Ammonia Gas, Amine, Alkalies |
|
Superheated Steam |
|
Low Molecular organic Acids (Formic and Acetic). |
|
|
Top^
|
|
|
